If you need industrial metal work, don't forget about the electroplate finishes. Electroplating your metal work will provide benefits that you might not thought about. Before you settle for bare metal, take a look at the list below. Here are just four of the reasons you need to include electroplating finishes on all your industrial metal work.
Provides Additional Protection
When you're working with metal, you want to ensure as much protection and strength as possible. One way to do that is to insist on electroplating finishes. These finishes provide an additional layer of protection against the damage that can occur from continued use. Not only that, but the electroplating finish ensures that your metal work will hold up under extreme conditions. This is particularly important when your metal work will be part of an industrial system.
Protects Against Heat Damage
If your metal work will be exposed to extreme heat, you want to make sure that the final product receives electroplate finishing. Bare metal can absorb heat, which can undermine the structural integrity of your industrial parts. This is particularly true when those parts are exposed to extreme heat on a daily basis. Electroplating finishes help protect against heat damage by forming an insulative seal around the metal. As a result, your metal work will be less likely to absorb unwanted heat, which means it will last longer.
Ensures Maximum Thickness
If you need your metal work to obtain a mandatory thickness, you're going to need an electroplating finish. When metal work is exposed to extreme conditions, it needs to start out with a thickness that can withstand the pressure. Unfortunately, bare metal can't always live up to those demands, which is where the electroplate finish comes into the picture. Palladium electroplating provides an additional layer of thickness that will hold up under the pressure it will be exposed to.
Decreases Risk of Premature Wear and Tear
If you depend on your metal work, you can't afford to deal with premature wear and tear. Not only does premature wear and tear increase the risk of accidents and injuries, it also increases your overhead; especially when you have to continually replace parts that have worn out prematurely. One way to decrease the risks associated with premature wear and tear is to insist on electroplating finishes.
Don't take chances with your metal work. Use electroplating finishes to extend the life of your parts and prevent unnecessary damage.